New Pages #updates #woodworking #troubleshoot

It’s been a while since I’ve updated the website, I’ve been a little busy but I hope to include more frequent updates from here on out.

Anyways her are two new pages added to the site. The first is a woodworking project where I designed an entertainment center for a couple friends. The other is the start of a new section on how to troubleshoot and it can be found in the tutorials section. Enjoy.

Entertainment Center

Troubleshooting Connectors

Testing Board Designs with OSH Park #OSHPark #PCBfab

This slideshow requires JavaScript.

So I created this little project to have a board that disassembled and could be soldered together to create a solid 10-6 pin ISP converter. Knowing this was a probably not going to work, I sent my design to OSHpark to test the limitations. Pictured above is start to finish of what I wanted and what I received.

In doing this I was able to determine a couple things many of which I’m sure are a no brainer to those experienced individuals. Never the less I hope it proves useful to the less experienced.

  • Carefully consider the size of drill tooling when designing your board. You’ll notice I was trying to get small gaps that were too small.
  • Also with tooling size into consideration, you will not be able to get squared off edges notched into your board. Drill bits are round and will make rounded notches on your board.
  • If you want to do something super fancy like soldering pieces of pcb together using pads at the edges of the board. Make sure the pads are big enough to get a good solid connection with both boards. Also consider the minimum distance from the edge of the board, half your pad could be drilled off.
  • Use silk screens to indicate the orientation of your connector. I found it somewhat difficult to determine how my connectors are oriented because I left this feature out. Especially when I tried using the connector another way.

I still think it was a cool idea, but when I began separating the parts and putting it together I realized it may have been an over engineered product. It would’ve been easier to leave it flat and use angled headers to make the connection.

DipTrace Tutorial: Design for OSHpark.com #DipTrace #OSHpark

DipTrace Featured_OSHPark

As promised. This is a detailed tutorial guiding you through the process of setting up your design files in DipTrace and exporting your files to formats accepted by OSH Park. Enjoy.

DipTrace: Design your PCB for OSHPark.com

MIT Welcomes Makers with New Maker Portfolio

MIT Welcomes Makers with New Maker Portfolio.

The MIT Admissions Dept is making it possible for young makers to share their projects as part of the application process, starting this year. Dr. Dawn Wendell, Assistant Director of Admissions at MIT, said that a new Maker Portfolio supplement on the MIT Admissions web site will provide a structured way for students to submit information about a diverse set of projects that they have participated in.